RJ45 PATCH CABLE with CAT7 ROUGH CABLE, S/FTP, PIMF Network Cable LAN DSL
Cat.7 raw cable: more data through the wire
The Cat.7 network cable is practically an upgrade to the Cat.6A patch cable: The Cat.6A network cable is equipped with a
Cat.7 raw cable. This makes it suitable for an operating frequency of up to 600 MHz and a
transmission speed of up to 10 Gbit/s. The Cat.6A raw cable, on the other hand, has an operating frequency of
500 MHz. Due to the increased frequency, the Cat.7 patch cable with CAT.6a connector can handle significantly more data traffic.
cope.
The halogen-free outer jacket of the Cat.7 cable provides additional safety. The patch cables are produced with a
Cat.7 raw cable to ensure the highest possible performance. They are perfect for use in
high-speed networks and for connecting routers, switches, lighting systems, digital displays
computers or any of the many new IoT devices. The Cat.7 network cable shows its optimal strength in the
Interaction with the data outlet, and the patch panel and keystone.
These products can easily cope with the high standards of the high-speed environment that
the use of Cat.7 network cables entails. Cat.7 cables are used, among other things, in professional IT networks
and in media technology, where large amounts of data have to be transmitted reliably.
Cat.7 network cable with gold contacts in CAT.6A RJ45 connector
Each Cat.7 cable pair within the Cat.7 patch cables with CAT.6A connectors is individually shielded in metal foil (PIMF).
This makes these cables particularly suitable for interference-free data transmission.
Due to its kink and jack protection, the high-quality, shielded Cat.6A RJ45 connector with gold-plated
contacts can withstand a high number of mating cycles without damage.
Your end devices will remain connected to the Internet even if they are moved unintentionally: These Cat.7 cables
with CAT.6A connectors can only be disconnected from the device by pressing the latching lug on the RJ45 connector.
The Cat.7 network cables are backward compatible, so they can also be used in Cat.5 or Cat.6 networks
and speeds up to 10 Gbit can be achieved.
General Data:
Contacts: 3 µ" Gold plated
Suitable for protection class: (IP) IP20
Cable type: S/FTP
Pin assignment: 1:1
Latching lever protection: Yes
Design: Shielded
Jacket material: LSZH
Assignment: according to TIA/EIA 568B
Application: Data center
Length imprint: Yes
Bend relief: molded
Category: 6A (TIA)
Connector type: RJ45 standard
Cable construction:
Raw cable: Cat.7
Connector type: Connector 2 RJ45 8(8)
AWG cross section: 27/7
Connector type: Port 1 RJ45 8(8)
Conductor material: Copper
Cable construction: 4x2
Cable sheath:
Cable outer diameter 6.0 mm